Like most sites, this site uses cookies to make it work. By continuing to use the site you accept our cookie policy. You won’t be shown this message again :)
Prove Humanity: Please click here to start.
You should not have to do this more than once.
If you continue to see this message, please email hello@[the site's address] for support.
Add to Compare |
Reach |
Stack |
Top Tube (actual) |
Seat Tube (effective) |
Head Angle |
Seat Angle |
Head Tube |
Chainstay |
Wheelbase |
Front Centre |
BB Drop |
BB Height |
Fork Rake / Offset |
Trail |
Fork Length (A2C) |
Seatpost Diameter |
Axle Spacing |
Wheel Size |
Seatpost Length |
Seatpost Offset |
Handlebar Width |
Stem Length |
Stem Angle |
Crank Length |
Front Travel |
Rear Travel |
Shock Size |
Data Source |
S1 | S2 | S3 | S4 | S5 | |
---|---|---|---|---|---|
Add to Compare | |||||
Reach | 340 | 502 | 493 | 433 | 581 |
Stack | 613 | 721 | 585 | 726 | 720 |
Top Tube (actual) | 661 | 903 | 879 | 919 | 1038 |
Seat Tube (effective) | 378 | 374 | 443 | 408 | 438 |
Head Angle | 59 | 74 | 66 | 69 | 68 |
Seat Angle | 78 | 74 | 83 | 79 | 81 |
Head Tube | 92 | 107 | 109 | 101 | 145 |
Chainstay | 368 | 392 | 502 | 362 | 375 |
Wheelbase | 1069 | 983 | 1472 | 1110 | 1076 |
Front Centre | 818 | 691 | 916 | 960 | 1002 |
BB Drop | 14 | 19 | 20 | 15 | 16 |
BB Height | 371 | 303 | 331 | 399 | 338 mm |
Fork Rake / Offset | 35 | 42 | 45 | 47 | 40 |
Trail | 138 | 150 | 130 | 116 | 127 |
Fork Length (A2C) | 550 | 466 | 535 | 540 | 529 |
Seatpost Diameter | 33 | 37 | 28 | 37 | 29 |
Axle Spacing | Boost | Boost | Boost | Boost | Boost |
Wheel Size | 29/27.5 | 29/27.5 | 29/27.5 | 29/27.5 | 29/27.5 |
Seatpost Length | 347 | 406 | 446 | 514 | 531 |
Seatpost Offset | 88 | 88 | 64 | 65 | 85 |
Handlebar Width | 900 | 783 | 949 | 820 | 896 |
Stem Length | 46 | 37 | 45 | 46 | 37 |
Stem Angle | 0 | 0 | 0 | 0 | 0 |
Crank Length | 184 | 178 | 172 | 182 | 140 |
Front Travel | 145 | 162 | 156 | 128 | 166 |
Rear Travel | 130 | 172 | 188 | 156 | 182 |
Shock Size | 230x60 | 230x60 | 230x60 | 230x60 | 230x60 |
Data Source | Manufacturer | Manufacturer | Manufacturer | Manufacturer | Manufacturer |
Note: Geometry with flip chip in the LOW position
Measurements are in millimeters and degrees.
Problem? Flag for Review or